Closed reduction and internal fixation for tillaux fractures, based on pre-operative three-dimensional computed tomography.

OBJECTIVE: This study aimed to propose treatment protocol and identify patterns of tillaux fractures using three-dimensional (3D) computed tomography (CT) analysis and to describe an effective reduction technique. METHODS: Forty-two juvenile patients with tillaux fractures were evaluated with 3D-CT scan for fracture displacement pattern and received surgical treatment. Tillaux fragment was reduced by pushing the superomedial quadrant part of the fragment slightly downward towards the ankle joint from anterolateral to posteromedial through 5-mm skin incisions with mosquito forceps. A 4.0 cannulated screw was subsequently inserted from the anterolateral to the posteromedial side parallel to the ankle joint. We analysed the distance and direction of fracture displacement with 3D-CT before the surgery. Pre-operative and post-operative plain radiographs were evaluated. RESULTS: Pre-operative 3D-CT analysis revealed a common fracture pattern, varus tilt, and external rotation of fragment. We achieved satisfactory reduction with residual fracture gaps less than 2 mm in 42 cases. Two cases had a 13-mm anterior gap that was reduced by mini-open reduction because of periosteal impingement. No significant clinical complications were found. CONCLUSION: The closed reduction technique developed based on the fracture pattern identified by 3D-CT anatomical analysis is safe and effective in treating tillaux fractures.

Domain transformation learning for MR image reconstruction from dual domain input.

Medical images are acquired through diverse imaging systems, with each system employing specific image reconstruction techniques to transform sensor data into images. In MRI, sensor data (i.e., k-space data) is encoded in the frequency domain, and fully sampled k-space data is transformed into an image using the inverse Fourier Transform. However, in efforts to reduce acquisition time, k-space is often subsampled, necessitating a sophisticated image reconstruction method beyond a simple transform. The proposed approach addresses this challenge by training a model to learn domain transform, generating the final image directly from undersampled k-space input. Significantly, to improve the stability of reconstruction from randomly subsampled k-space data, folded images are incorporated as supplementary inputs in the dual-input ETER-net. Moreover, modifications are made to the formation of inputs for the bi-RNN stages to accommodate non-fixed k-space trajectories. Experimental validation, encompassing both regular and irregular sampling trajectories, validates the method's effectiveness. The results demonstrated superior performance, measured by PSNR, SSIM, and VIF, across acceleration factors of 4 and 8. In summary, the dual-input ETER-net emerges as an effective both regular and irregular sampling trajectories, and accommodating diverse acceleration factors.

Controlled posterior condylar milling technique for unicompartmental knee arthroplasty minimises tibia resection during gap balancing: Short-term clinical results.

PURPOSE: The purpose of this study was to demonstrate the clinical utility of controlled posterior condylar milling (CPCM) in gap balancing while minimally resecting the tibia during fixed-bearing unicompartmental knee arthroplasty (UKA). METHODS: This study is a retrospective cohort study. Patients who underwent medial UKA for isolated medial compartment osteoarthritis with a minimum follow-up of 2 years were included. The patients were divided into two groups: the conventional group (n = 56) and the CPCM group (n = 66). In the CPCM group, the proximal tibia was resected at the level of the distal end of the subchondral bone. If the flexion gap was tighter than extension, the posterior condyle was additionally milled to adjust gap tightness. Standing knee X-ray and scanogram were used to evaluate alignment and tibia resection amount. Range of motion (ROM) and Western Ontario McMaster Universities Osteoarthritis Index (WOMAC) scores were used to evaluate clinical outcomes. RESULTS: The CPCM group showed significantly smaller tibia resection (3.6 ± 1.9 mm) compared to the conventional group (5.2 ± 2.7 mm) (p < 0.001). Postoperative ROM (133.0 ± 8.3°, 135.2 ± 7.2°, n.s.) and WOMAC (19.3 ± 13.6, 23.6 ± 17.7, n.s.) were not significantly different between the two groups. Postoperative periprosthetic fractures occurred in two patients in conventional group, while the CPCM group had no periprosthetic fractures. CONCLUSION: The CPCM technique may be a simple and useful intraoperative technique that can achieve minimal tibia resection and promising clinical outcomes while easily adjusting gap tightness between flexion and extension during medial fixed-bearing UKA. LEVEL OF EVIDENCE: Level III.

Suprapatellar intramedullary nail combined with screw fixation has comparable surgical outcomes to minimally invasive locking plate fixation in ipsilateral tibial plateau and shaft fractures.

PURPOSE: To compare union rate, union time, alignment, and complication rate in ipsilateral tibia plateau and shaft fractures treated via suprapatellar intramedullary nailing with screw fixation and minimally invasive locking plate fixation. MATERIALS AND METHODS: A retrospective study was conducted on 48 patients who underwent minimally invasive plate fixation (n = 35) or suprapatellar intramedullary nailing with screw fixation (n = 13), for the treatment of ipsilateral tibial plateau and shaft fractures with at least 1-year follow-up. Union rate, union time, radiologic alignment, and complication rate such as malalignment, nonunion, and fracture-related infection (FRI) were investigated. RESULTS: Demographic data were not different between the two groups. Coronal plane alignment was 0.17 ± 4.23 in the plate group and -0.48 ± 4.17 in the intramedullary nail group (p = 0.637). Sagittal plane alignment was -0.13 ± 5.20 in the plate group and -1.50 ± 4.01 in the suprapatellar intramedullary nail group (p = 0.313). Coronal and sagittal malalignment recorded equal results: (p > 0.99), FRI (p = 0.602), nonunion and union times recorded (p = 0.656) and (p = 0.683, 0.829), respectively, and showed no significant difference between the two groups. CONCLUSION: Suprapatellar intramedullary nailing with screw fixation had similar surgical outcomes with minimally invasive locking plate fixation in ipsilateral tibial plateau and shaft fractures in terms of union rate, union time, alignment, and complication rate. Thus, frequent use of intramedullary nailing combined with screw fixation is anticipated in patients with ipsilateral tibial plateau and shaft fractures when the soft tissue condition is not desirable. LEVEL OF EVIDENCE: Level III.

Fixed-Bearing Unicompartmental Knee Arthroplasty in Tibia Vara Knees Results in Joint Surface Malalignment and Varus Joint Line Obliquity, but Does Not Affect Functional Outcomes at Greater Than 5 Years Follow-Up.

BACKGROUND: This study aimed to investigate the clinical outcomes of fixed-bearing medial unicompartmental knee arthroplasty (UKA) for tibia vara knees and the associated changes in joint space malalignment (JSM) and joint line obliquity (JLO). METHODS: We retrospectively analyzed a consecutive group of 100 patients who underwent fixed-bearing medial UKA with a preoperative medial proximal tibia angle (MPTA) ≥86° (n = 50) and MPTA <86° (n = 50) and who had a minimum 5-year follow-up. Radiological parameters, including the hip-knee-ankle angle, MPTA, and the postoperative JSM and JLO, were measured. Functional evaluation was performed using the range of motion, visual analog scale, Knee Society Knee Score, Knee Society Function Score, and Western Ontario and McMaster Universities Osteoarthritis Index score. RESULTS: The MPTA <86° group showed significantly higher postoperative JLO (91.8 versus 90.4°, respectively; P = .002) and JSM (6.1 versus 4.2°, respectively; P = .026) compared to the MPTA ≥86° group. Functional outcomes, including range of motion, visual analog scale, Knee Society Knee Score, Knee Society Function Score, and Western Ontario and McMaster Universities Osteoarthritis Index scores, were not significantly different between the 2 groups. CONCLUSIONS: Fixed-bearing medial UKA is a safe and effective surgical option for patients who have tibia vara knees, as an increase in JLO and JSM postoperatively does not have a clinically relevant impact, even after a minimum 5-year follow-up.

Can bone scintigraphy reflect the progression of osteoarthritis after unicompartmental knee arthroplasty?

BACKGROUND: Bone scintigraphy (BS) has been reported to be a useful predictor of osteoarthritis (OA) progression in primary knee OA. However, no previous studies have explored the relationship between BS and OA progression in the retained compartments after unicompartmental knee arthroplasty (UKA). Thus, we evaluated whether OA progresses to other compartments in patients who undergo UKA and if increased uptake on BS is associated with OA progression in other compartments after UKA. METHODS: A total of 41 patients with knee BS at least five years after UKA were included. Radiographic OA progression in other compartments was assessed by grading and comparing OA severity in each patient using the Kellgren-Lawrence grading system (K-L grade) and Osteoarthritis Research Society International (OARSI) atlas score. After UKA, the correlation between BS uptake and radiographic OA progression was analyzed in each retained compartment. A correlation analysis was also performed to evaluate the association between BS uptake and OA progression grades. RESULTS: A significant progression of OA was observed in both contralateral tibiofemoral and patellofemoral compartments after UKA at 98.5 ± 26.0 months of follow-up (all p<0.001). No correlation was found between BS uptake and radiographic OA progression nor between BS uptake and radiographic OA progression grade in the contralateral and patellofemoral compartments. CONCLUSIONS: Following UKA, OA progresses in the retained contralateral tibiofemoral and patellofemoral compartments over a minimum five-year follow-up period. Thus, BS is ineffective in assessing the progression of OA in these compartments.

Intraoperative assessment of hindfoot alignment using C-arm fluoroscopy.

BACKGROUND: Hindfoot malalignment can cause various foot and ankle problems. For better surgical performance and correction of hindfoot malalignments, reliable intraoperative determination of hindfoot alignment is essential. However, there is no standard method for the intraoperative assessment of hindfoot alignment. We devised an intraoperative modified Méary posteroanterior (IOPPA) view to assess intraoperative hindfoot alignment. This study aimed to compare this intraoperative method with other radiographic hindfoot alignment measurements. METHODS: Thirty-seven patients (47 feet) with various foot and ankle conditions scheduled to undergo surgery were prospectively recruited. Before surgery, the Saltzman, long axial, and modified Méary views were taken in a controlled and standardized fashion. IOPPA views were obtained under simulated weight bearing conditions using C-arm fluoroscopy in the operating room before surgery. The relationship between the IOPPA view and the three radiographic hindfoot alignments was evaluated using Pearson's correlation. RESULTS: The mean hindfoot alignment angle was varus 3.50° (CI, varus 1.91 to 5.08) on the Saltzman view, varus 2.00° (CI, varus 0.60 to 3.39) on the long axial view, varus 0.13° (CI, valgus 1.41 to varus 1.67) on the modified Méary view, and varus 1.32° (CI, valgus 0.02 to varus 2.65) on IOPPA view. The IOPPA view and the three other hindfoot alignment views were found to be significantly correlated (r = 0.60 for the Saltzman view, r = 0.50 for the long axial view, r = 0.71 for the modified Méary view, P < .05). The intraobserver ICC (Intraclass Correlation Coefficient) value was 0.974 and interobserver ICC (Intraclass Correlation Coefficient) value was 0.988 for the IOPPA view (P < .001). CONCLUSION: There was a statistically significant correlation between the IOPPA view and the other three hindfoot alignment views. We also found that interobserver and intraobserver ICC values were excellent. This study proposes that the IOPPA view can be used as a reliable intraoperative assessment tool for hindfoot alignment. LEVEL OF EVIDENCE: Prospective study.

Rotational stability can be enhanced in revision anterior cruciate ligament reconstruction using the over-the-top augmentation technique compared to single bundle technique.

PURPOSE: Revision anterior cruciate ligament (ACL) reconstruction is technically challenging due to mispositioned tunnels, bone loss, and tunnel enlargement, which may compromise graft fixation and result in failure. To obtain firm graft fixation and strength in one stage, we utilized an over-the-top augmentation technique using an Achilles tendon allograft in revision ACL reconstruction (OA-ACLR). This study compared OA-ACLR with single-bundle ACL reconstruction (SB-ACLR). We hypothesized that OA-ACLR would enhance the postoperative knee joint rotational stability. METHODS: We retrospectively analyzed 47 patients who underwent revisional OA-ACLR and 48 who underwent primary SB-ACLR with minimum follow-up of 6 months. Knee instability was evaluated with the anterior drawer, Lachman, and pivot shift tests preoperatively and at the final follow-up. Side-to-side differences were compared with the non-affected side at the final follow-up. Function was evaluated using the IKDC subjective and Lysholm knee scores preoperatively and at the final follow-up. RESULTS: The groups did not differ in terms of sex, age, BMI, and etiology. There were no significant differences in concomitant surgical procedures, such as meniscectomy and meniscus repair, between the two groups (p = 0.335, > 0.99). Both groups significantly improved in the anterior drawer, Lachman, pivot shift tests, and IKDC and Lysholm knee scores after surgery (all p < 0.001). The OA-ACLR group showed significantly higher rotational stability in the pivot shift test than the SB-ACLR group (p = 0.017). The postoperative side-to-side difference, the IKDC and Lysholm scores showed no significant differences between the groups (p = 0.34, 0.301, 0.438). CONCLUSIONS: OA-ACLR showed enhanced rotational stability with pivot shift test compared to SB-ACLR. It may be considered a useful alternative for revision ACL reconstruction.

Selective Extracellular Matrix Guided Mesenchymal Stem Cell Self-Aggregate Engineering for Replication of Meniscal Zonal Tissue Gradient in a Porcine Meniscectomy Model.

Degenerative meniscus tears (DMTs) are prevalent findings in osteoarthritic knees, yet current treatment is mostly limited to arthroscopic partial meniscectomy rather than regeneration, which further exacerbates arthritic changes. Translational research regarding meniscus regeneration is hindered by the complex, composite nature of the meniscus which exhibit a gradient from inner cartilage-like tissue to outer fibrous tissue, as well as engineering hurdles often requiring growth factors and cross-linking agents. Here, a meniscus zonal tissue gradient is proposed using zone-specific decellularized meniscus extracellular matrix (DMECM) and autologous synovial mesenchymal stem cells (SMSC) via self-aggregation without the use of growth factors or cross-linking agents. Combination with zone-specific DMECM during self-aggregation of MSCs forms zone-specific meniscus tissue that reflects the respective DMECM harvest site. The implantation of these constructs leads to the regeneration of meniscus tissue resembling the native meniscus, demonstrating inner cartilaginous and outer fibrous characteristics as well as recovery of native meniscal microarchitecture in a porcine partial meniscectomy model at 6 months. In all, the findings offer a potential regenerative therapy for DMTs that may improve current partial meniscectomy-based patient care.

Comparison of suprapatellar intramedullary nailing versus minimal invasive locked plating for proximal tibia fractures.

PURPOSE: To compare the radiological alignment, union time, union rate, and complication rate between suprapatellar intramedullary nails and minimally invasive locking plate fixation in the treatment of proximal tibial fractures. MATERIALS AND METHODS: We retrospectively analyzed 103 patients who underwent plate fixation (n = 50) or suprapatellar intramedullary nailing (n = 53) for proximal tibial fractures involving the meta-diaphyseal junction between November 2015 and October 2020 at our institution. The union rate, union time, radiologic alignments, and complications, such as malalignment, nonunion, and deep infection, were investigated. RESULTS: The demographic data did not differ between the plate and suprapatellar intramedullary nail groups. The alignment of the coronal plane was 0.24 ± 3.19 in the plate group and - 0.49 ± 2.22 in the intramedullary nail group (p = 0.196). Sagittal plane alignment was - 0.29 ± 4.97 in the plate group and 0.24 ± 4.12 in the intramedullary nail group (p = 0.571), and coronal malalignment (p = 0.196), sagittal malalignment (p = 0.57), deep infection (p = 0.264), nonunion (p = 0.695), union time (p = 0.329), and final union rate (p = 0.699) were not significantly different between groups. CONCLUSION: Compared with the minimally invasive locking compression plate group, the suprapatellar intramedullary nail group yielded comparable results in terms of radiological alignment and complications. Considering that proximal tibial fractures are associated with high-energy trauma and severe soft tissue damage, we believe that a suprapatellar intramedullary nail may be a good alternative. LEVEL OF EVIDENCE: Level III.

Trajectory of bolt and length of plate in femoral neck system determine the stability of femur neck fracture and risk of subsequent subtrochanteric fracture : a finite element analysis.

BACKGROUND: This study aimed to analyze the differences in the stability of fractures, stress distribution around the distal-most screw according to the length of the plate and the trajectory of the bolt in Pauwels type III femoral neck fracture using the femoral neck system (FNS). METHODS: Finite element models of Pauwels type III femoral neck fractures were established with surgical variations in the trajectory of the bolt (central, inferior, valgus, and varus) and length of the lateral plate (1- and 2-hole plate). The models were subsequently subjected to normal walking and stair-climbing loads. RESULTS: The screw-holding cortical bone in subtrochanter in the model with a 2-hole plate and the bolt in the inferior trajectory and the models with 1-hole or 2-hole plate and the bolt in valgus trajectory had shown greater maximum principal strain than the models with central or varus trajectories. The gap and sliding distance on the fracture surface were larger with inferior or varus trajectories of the bolt and smaller with the valgus trajectory of the bolt under both loads, compared to those of the central trajectory. CONCLUSION: For the fixation of Pauwels type III femoral neck fracture, the trajectory of the FNS bolt and the length of the plate affect the mechanical stability of the fracture and the strain of cortical bone around the distal-most screw. The surgical target should stay on the central trajectory of the bolt and the 2-hole plate's mechanical benefits did not exceed the risk.

Pre-sliding of femoral neck system improves fixation stability in pauwels type III femoral neck fracture: a finite element analysis.

BACKGROUND: Femoral neck fractures are a common injury in older adults and their management presents a significant challenge for orthopedic surgeons. The Femoral Neck System (FNS) was recently introduced for the fixation of femur neck fractures. Although neck shortening was reduced with the FNS, the complication rates were not reduced. Thus, improvements to enhance fixation stability should be made for the FNS. We hypothesized that (1) the pre-sliding technique and (2) the use of longer anti-rotation screw would increase fracture stability. This study aimed to determine the change in fracture stability using the pre-sliding technique and long anti-rotation screw in the FNS for fixation of Pauwels type III femoral neck fractures. METHODS: Finite element models of Pauwels type III femoral neck fracture fixed with pre-sliding FNS and 5-mm longer anti-rotation screw were established. The models were subjected to normal walking load. The material properties of the elements belonging to the bone were mapped by assigning the formulation with the computed tomography Hounsfield unit. RESULTS: Pauwels type III femoral neck fractures fixed with pre-slided FNS showed better fracture stability, decreasing fracture gap and sliding by 14% and 12%, respectively, under normal walking load. No element of cortical bone in any of the models had an absolute value of principal strain that exceeded 1%. The peak von Mises stress (VMS) of the implants ranged from 260 to 289 MPa, and the highest peak VMS value was 50% lower than the yield strength of the titanium alloy (800 MPa). The longer anti-rotation screw did not affect fracture stability. CONCLUSIONS: The pre-sliding technique using the FNS showed higher fracture stability than the standard fixation technique for a Pauwels type III femoral neck fracture. The longer anti-rotation screw did not contribute significantly to fixation stability. As this finite element analysis considered the inhomogeneous mechanical property of the bone, it offered equivalent mechanical conditions to investigate the components of interest.

Lateral Retinacular Release During Medial Unicompartmental Knee Arthroplasty in the Presence of Patello-Femoral Joint Arthritis Relieves Patello-Femoral Joint Pressure and Improves Associated Symptoms.

BACKGROUND: This study evaluated the effects of concomitant lateral patellar retinacular release (LPRR) during medial unicompartmental knee arthroplasty (UKA). METHODS: We retrospectively analyzed 100 patients who had patello-femoral joint (PFJ) arthritis who underwent medial UKA with (n = 50) and without (n = 50) LPRR who had ≥2 years follow-up. Radiological parameters associated with lateral retinacular tightness, including patellar tilt angle (PTA), lateral patello-femoral angle (LPFA), and congruence angle, were measured. Functional evaluation was performed using the Knee Society Pain Score, Knee Society Function Score (KSFS), Kujala Score, and the Western Ontario McMaster Universities Osteoarthritis Index score. Intraoperative patello-femoral pressure evaluation was performed on 10 knees to evaluate the pressure changes before and after LPRR. Mann-Whitney U-tests were used for statistical analyses. RESULTS: Demographic data did not differ between the LPRR(+) and LPRR(-) groups. A decrease in PTA and an increase in LPFA were observed in the LPRR(+) group compared to those in the LPRR(-) group (PTA; -0.54 versus -1.74, P = .002, LPFA; 0.51 versus 2.01, P = .010). The LPRR(+) group showed significantly better KSFS and Kujala scores than the LPRR(-) group (KSFS: 90 versus 80, P = .017; Kujala score: 86 versus 79, P = .009). Intraoperative patello-femoral pressure analysis showed a 22.6% reduction in the PFJ contact pressure and an 18.7% reduction in PFJ peak pressure after LPRR. (P = .0015, P < .0001, respectively) CONCLUSION: A LPRR during UKA may be a simple and useful adjunct procedure to relieve PFJ symptoms with concomitant PFJOA.

Adenosine A2A Receptor Agonist, Polydeoxyribonucleotide Treatment Improves Locomotor Function and Thermal Hyperalgesia Following Neuropathic Pain in Rats.

PURPOSE: Lithotomy position has been widely used in the various urologic surgery. Occasionally sensory and motor problems of the lower extremities are occurred due to the lithotomy position and these deficits may be related with sciatic nerve injury (SNI). Inflammatory process is a factor to induce functional impairment after SNI. Therefore, we evaluated the role of adenosine A2A receptor agonists, polydeoxyribonucleotide (PDRN) showing anti-inflammatory effect on locomotor function following SNI in rats. METHODS: Sciatic nerve was compressed with surgical clips for 1 minute after exposing of right sciatic nerve. After 3 days of SNI, PDRN (2, 4, and 8 mg/kg) was applied to the damaged area of sciatic nerve once daily for 10 days. Walking track analysis was conducted for locomotor function and plantar test was performed for thermal pain sensitivity. Level of cyclic adenosine-3´,5´-monophosphate (cAMP) were measured using enzyme-linked immunosorbent assay. Western blot analysis was performed for tumor necrosis factor (TNF)-α, interleukin (IL)-1ß, cAMP response element binding protein (CREP), vascular endothelial growth factor (VEGF). Immunofluorescence for neurofilament was also conducted. RESULTS: Locomotor function was decreased and thermal pain sensitivity was increased by SNI. SNI enhanced proinflammatory cytokines' production, such as TNF-α and IL-1ß, while suppressed CREP phosphorylation and cAMP level. SNI also reduced the expression of VEGF and neurofilaments. However, treatment with PDRN inhibited proinflammatory cytokines' production and upregulated CREP phosphorylation and cAMP expression. PDRN also enhanced the expression of VEGF and neurofilaments. As a result, PDRN improved locomotor function and alleviated thermal hyperalgesia after SNI. CONCLUSION: PDRN has shown potential to be used as an effective treatment for neuropathic pain.

Baseline Correction of the Human 1H MRS(I) Spectrum Using T2* Selective Differential Operators in the Frequency Domain.

The baseline distortion caused by water and fat signals is a crucial issue in the 1H MRS(I) study of the human brain. This paper suggests an effective and reliable preprocessing technique to calibrate the baseline distortion caused by the water and fat signals exhibited in the MRS spectral signal. For the preprocessing, we designed a T2* (or linewidth within the spectral signal) selective filter for the MRS(I) data based on differential filtering within the frequency domain. The number and types for the differential filtering were determined by comparing the T2* selectivity profile of each differential operator with the T2* profile of the metabolites to be suppressed within the MRS(I) data. In the performance evaluation of the proposed differential filtering, the simulation data for MRS spectral signals were used. Furthermore, the spectral signal of the human 1H MRSI data obtained by 2D free induction decay chemical shift imaging with a typical water suppression technique was also used in the performance evaluation. The absolute values of the average of the filtered dataset were quantitatively analyzed using the LCModel software. With the suggested T2* selective (not frequency selective) filtering technique, in the simulated MRS data, we removed the metabolites from the simulated MRS(I) spectral signal baseline distorted by the water and fat signal observed in the most frequency band. Moreover, in the obtained MRSI data, the quantitative analysis results for the metabolites of interest showed notable improvement in the uncertainty estimation accuracy, the CRLB (Cramer-Rao Lower Bound) levels.

A New Combination of Radio-Frequency Coil Configurations Using High-Permittivity Materials and Inductively Coupled Structures for Ultrahigh-Field Magnetic Resonance Imaging.

In ultrahigh-field (UHF) magnetic resonance imaging (MRI) system, the RF power required to excite the nuclei of the target object increases. As the strength of the main magnetic field (B0 field) increases, the improvement of the RF transmit field (B1+ field) efficiency and receive field (B1- field) sensitivity of radio-frequency (RF) coils is essential to reduce their specific absorption rate and power deposition in UHF MRI. To address these problems, we previously proposed a method to simultaneously improve the B1+ field efficiency and B1- field sensitivity of 16-leg bandpass birdcage RF coils (BP-BC RF coils) by combining a multichannel wireless RF element (MCWE) and segmented cylindrical high-permittivity material (scHPM) comprising 16 elements in 7.0 T MRI. In this work, we further improved the performance of transmit/receive RF coils. A new combination of RF coil with wireless element and HPM was proposed by comparing the BP-BC RF coil with the MCWE and the scHPM proposed in the previous study and the multichannel RF coils with a birdcage RF coil-type wireless element (BCWE) and the scHPM proposed in this study. The proposed 16-ch RF coils with the BCWE and scHPM provided excellent B1+ field efficiency and B1- field sensitivity improvement.

An End-to-End Recurrent Neural Network for Radial MR Image Reconstruction.

Recent advances in deep learning have contributed greatly to the field of parallel MR imaging, where a reduced amount of k-space data are acquired to accelerate imaging time. In our previous work, we have proposed a deep learning method to reconstruct MR images directly from k-space data acquired with Cartesian trajectories. However, MRI utilizes various non-Cartesian trajectories, such as radial trajectories, with various numbers of multi-channel RF coils according to the purpose of an MRI scan. Thus, it is important for a reconstruction network to efficiently unfold aliasing artifacts due to undersampling and to combine multi-channel k-space data into single-channel data. In this work, a neural network named 'ETER-net' is utilized to reconstruct an MR image directly from k-space data acquired with Cartesian and non-Cartesian trajectories and multi-channel RF coils. In the proposed image reconstruction network, the domain transform network converts k-space data into a rough image, which is then refined in the following network to reconstruct a final image. We also analyze loss functions including adversarial and perceptual losses to improve the network performance. For experiments, we acquired k-space data at a 3T MRI scanner with Cartesian and radial trajectories to show the learning mechanism of the direct mapping relationship between the k-space and the corresponding image by the proposed network and to demonstrate the practical applications. According to our experiments, the proposed method showed satisfactory performance in reconstructing images from undersampled single- or multi-channel k-space data with reduced image artifacts. In conclusion, the proposed method is a deep-learning-based MR reconstruction network, which can be used as a unified solution for parallel MRI, where k-space data are acquired with various scanning trajectories.

Bilateral superficial cervical plexus block for parathyroidectomy during pregnancy: A case report.

BACKGROUND: Primary hyperparathyroidism (PHPT) is the most common cause of pregnancy-related hypercalcemia. PHPT can cause maternal and fetal complications in pregnant women. General anesthesia for non-obstetric surgery in pregnant women is associated with maternal hazards and concerns regarding long-term neonatal neurocognitive effects. Surgical removal of the lesion in mid-pregnancy is currently the primary treatment option for pregnant patients with PHPT. However, the blood calcium concentration at which surgery should be considered remains under discussion due to the risk of miscarriage. CASE SUMMARY: A 31-year-old nulliparous woman at 11 wk of gestation was admitted to our hospital for parathyroidectomy. The patient had a history of intrauterine fetal death with unknown etiology at 16 wk of gestation 1 year prior. Her blood test results showed that the serum calcium level was elevated to 12.9 mg/dL, and the parathyroid hormone level was elevated to 157 pg/mL. In a neck ultrasound, it revealed a 0.8 cm × 1.5 cm sized oval, hypoechoic mass in the upper posterior of the left thyroid gland, which was compatible with parathyroid adenoma. Superficial cervical plexus block (SCPB) for parathyroidectomy was performed. After surgery, the obstetrician checked the status of the fetus, and there were no abnormal signs. Since then her calcium level returned to normal values after one week of surgery and a healthy male neonate of 2910 g was delivered vaginally at 38 wk of gestation. CONCLUSION: Our case suggests that SCPB can be an anesthetic option for parathyroidectomy during the first trimester of pregnancy.

Simulation Study of Radio Frequency Safety and the Optimal Size of a Single-Channel Surface Radio Frequency Coil for Mice at 9.4 T Magnetic Resonance Imaging.

The optimized size of a single-channel surface radio frequency (RF) coil for mouse body images in a 9.4 T magnetic resonance imaging (MRI) system was determined via electromagnetic-field analysis of the signal depth according to the size of a single-channel coil. The single-channel surface RF coils used in electromagnetic field simulations were configured to operate in transmission/reception mode at a frequency of 9.4 T-400 MHz. Computational analysis using the finite-difference time-domain method was used to assess the single-channel surface RF coil by comparing single-channel surface RF coils of varying sizes in terms of |B1|-, |B1+|-, |B1-|- and |E|-field distribution. RF safety for the prevention of burn injuries to small animals was assessed using an analysis of the specific absorption rate. A single-channel surface RF coil with a 20 mm diameter provided optimal B1-field distribution and RF safety, thus confirming that single-channel surface RF coils with ≥25 mm diameter could not provide typical B1-field distribution. A single-channel surface RF coil with a 20 mm diameter for mouse body imaging at 9.4 T MRI was recommended to preserve the characteristics of single-channel surface RF coils, and ensured that RF signals were applied correctly to the target point within RF safety guidelines.

Biomechanical Evaluation of Modified ACL Reconstruction with Over-the-Top Augmentation Technique.

Background: Modified ACL reconstruction with over-the-top augmentation technique (OA-ACLR) was designed to allow one-stage revision regardless of tunnel conditions as well as to offer firm stability by hybrid double-fixation. Thus, the purpose of the study is to biomechanically evaluate its effect on knee stability by comparing it with single-bundle ACL reconstruction (SB-ACLR). Methods: Ten porcine knees were sequentially tested using a custom testing system for intact ACL, ACL deficiency, SB-ACLR and OA-ACLR. First, 134-N anterior tibial load was applied, and anterior tibial translation was measured at 30°, 60°, and 90°. Then, anterior tibial translation and relative tibial rotation were measured in a combined rotatory load of 5-Nm of internal tibial torque and 10-Nm of valgus torque. Results: Under anterior tibial load or combined anterior and rotatory loads, SB-ACLR and OA-ACLR resulted in no significant increase in anterior tibial translation at all flexion angles compared with an intact ACL group, and no significant difference was noted in anterior tibial translation between the two ACL reconstruction groups. In combined rotatory load, OA-ACLR resulted in enhanced rotational stability compared with SB-ACLR, and it more closely restored relative tibial internal rotation to the intact ACL group. Conclusions: Our study showed that modified ACL reconstruction with over-the-top augmentation technique resulted in enhanced rotational stability compared to the conventional single-bundle ACL reconstruction, especially at lower flexion angle in a porcine model. Therefore, with several potential advantages as well as biomechanical superiority, our new technique could be clinically applicable in primary and revision ACL reconstruction. Level of Evidence: Experimental.